Finish Thompson

• DB Series - The DB series magnetic drive pump is the new standard for hydraulic efficiency and corrosive fluid handling.  The pumps boast several features that include being magnetically coupled so no seals to replace, extended run dry capability with a carbon bushing, and many sizes available to fit your desired pump rate.  
• SP Series - The SP series magnetic drive pump is one of the most versatile and economical centrifugal pump on the market.  This model is perfect for applications difficult for ordinary centrifugal pumps, such as pumping fluid from below grade, emptying tanker trucks or rail cars, transferring fluids from the top of tall bulk storage tanks to reduce the possibility of leaks from sidewall-mounted bulkhead fittings, overcoming piping systems that tend to have trapped or entrained air, or when optimum run-dry protection is needed.
• UltraChem (UC) Series - The UC series magnetic drive pump is an ANSI dimensional pump.  This series is constructed from tough ductile iron with a ETFE lining for superior corrosion resistance.  Powerful neodymium magnets drive the impeller through a carbon-filled ETFE lined barrier for dependable, leak-free operation with no environmental emissions, no power-robbing double mechanical seals and no seal support systems. 
• MSDB & MSKC Series - The MSDB and MSKC magnetic drive pumps are sealless Multi-Stage pumps.  The pumps are able to generate increased head at low flow rates with low power consumption.  Because of the two stage design they have a smaller footprint compared to pumps that require a larger diameter impeller.  
• VKC & MSVKC Series - The VKC and MSVKC series magnetic drive pump are vertical pumps.  The pumps offer excellent corrosion resistance with the reliability of being magnetically driven.   
• GP Series - The GP series sealed pumps are value priced industrial pumps designed to provide years of reliable service.  Many customizable options including polypropylene or PVDF housing and options between bellows, multi-spring, or double type seals.  Sealed air tight column helps prevent shaft and motor corrosion and reduces environmental emissions.  Single impeller prevents aeration and eliminates microbubbles in fluid being pumped.
• AP Series -  The AP series stainless steel sealed pumps are rugged and compact with an option to be horizontal or vertical.  The horizontal (AC pump) are available with FDA compliant materials and many various configurations to be most suitable for your application.  

Neptune

• 500 Series - The 500 series hydraulic metering pumps are perfect for metering application.  Each pump features a variable oil by-pass stroke adjustment mechanism which will allow better valve performance than variable leakage designs.  The 500 series pumps are available in simples and duplex configurations with capacities up to 94 gallons per hour. 
• 600/6000 Series - The 600/6000 series hydraulic metering pumps are designed for high-pressure, high-volume applications and are available in both simplex or duplex models.  The 600 and 6000 series pumps have an adjustable pump capacity through the use of a micrometer dial that can be varied while pump is running or stopped.  These pumps also utilize a hydraulically-balanced PTFE diaphragm that eliminates stress.
• MP7000 Series - The MP7000 series is a mechanically-actuated metering pump engineered from the ground up to be more robust and durable than similar mechanical metering pump designs.   The pump series has an oil-free gearbox design which eliminates the potential for gearbox oil to contaminate the process.  They are able to provide reliable and accurate dosing of a wide range of mild to aggressive chemicals.
• PZ Series - The PZ Series electronic metering pumps offer low volume and low pressure for accurate, reliable injection for pumping chemicals and additives to a variety of applications.  The PZ pumps are offered in three sizes that are popular with water treaters, filtration and purification applications, well drillers, and others.
• NXP/NSP Series - The NXP, stepper motor pumps, and NSP, solenoid pumps, are now available and have the option to be manual, analog, or pulse control.  These pumps are ideal for chemical applications, requiring reliable and accurate dosing.  NXP and NSP series pumps are available with a variety of liquid head materials to fit into many applications.  

Neptune

• Abaque Series - The Abaque series utilizes the peristaltic technology which results in high performance, reliability, and the ability to handle the toughest pumping challenges.  The seal-less design eliminates leaks and product contamination, as well as the ability to run dry continuously without adversely affecting the pump's performance, pressure, and accuracy.  The Abaque pump has none of the usual parts that create problems.  The hose is the only replacement part.  Various hose options for best application compatibility.  

Finish Thompson

• FTI Air Series - The air-operated double diaphragm (AODD) pumps have many benefits over other pump technologies.  However, the FTI Air series has its own additional unique features.  It features a lube-free, non-stalling air valve, ideal for various applications and environments.  The air valve contains very few parts compared to other air valves in the market, reducing maintenance time, costs, and downtime.  

Finish Thompson

• PF Series - The PF series offers a unique double suction impeller which provides high flow and high head.  Sealless design improves reliability.  The PFS offers a FDA-compliant material and ATEX certified options.  
• EF Series -  The EF series provides an economical choice for light duty transfer.  Ideal replacement for hand pumps.  ATEX certified options available.  
• TT Series - The TT series is a sealed pump with PTFE screw-type lifting compressors.  Ideal for liquids containing small particulate or solvents.  Model STTS is constructed of FDA-compliant materials.  
• BT/HVDP - The BT series is a high viscosity sealed design with PTFE screw-type lifting compressors for liquids up to 15,000cP.  The HVDP series is a progressive cavity, positive displacement, mechanically sealed pump for high viscosity liquids up to 20,000 cP - 100,000 cP depending on the model. FDA-compliant material options.
• TB Series - The TB series pump is a lightweight pump suitable for low to medium viscosity mild corrosives, solvents, and chemicals.  Fits smaller bung openings.  

Miller Leaman

• Thompson Strainer - The Thompson Strainer is a highly efficient, patented stainless steel strainer which features a large conical screen, offering substantially more screen surface area versus traditional y-strainers or basket strainers.  The strainer has a unique design which allows heavier debris to be pushed downward away from the conical screen and into a large reservoir at the base of the strainer. 

Miller Leaman

• Helix Disc Filter - The Miller Leaman's Helix Disc filter models are available in three different sizes and can be installed in any orientation.  As water enters the filter housing, a high velocity centrifugal action occurs, spiraling heavier particles away from the disc cartridge, down to the base of the filter.  
• Helix Screen Filter - The Helix Screen filter models are available in three different sizes and can be installed in any orientation.  As water enters the filter housing, a high velocity centrifugal action occurs, spiraling heavier particles away from the screen cartridge, down to the base of the filter.

Monitor Technologies

• Rotary Paddle
  • KA & KAX - Economical point level control sensor for the detection of dry bulk materials.  This level switch is ideal for use as low level and high level indicators in bins, silos, hoppers, and other vessels.
  • SafePoint® - This sensor provides the ultimate in fail-safe performance whenever critical continuous operation must be ensured.  Detection of both material presence/absence and its own operational status is performed on a continuous basis.
• RF Capacitance Probe - The TrueCap® RF capacitance probes are designed to provide a high level of sensitivity, stability, and durability for powder and bulk solids applications, as well as liquid and slurry applications.
  • MK-2 - The MK-2 is a state of the art point level sensor providing maximum performance, reliability and value.
  • MK-2e - The MK-2e provides high quality and performance at the lowest possible price.
• Vibratory Probe - The DuraVibe™ vibrating probe principle eliminates problems associated with temperature, humidity, and material changes, while providing state of the art electronic reliability and accuracy that requires no calibration.  
  • PZP - The PZP is extremely sensitive and works on a wide range of material densities from very light to heavy.
  • VibraRod™ - The VibraRod™ provides reliable point level measurement sensing in a wide variety of applications within powder and bulk solids markets
• Diaphragm Switch
  • G, GX, & GX-SS - These models are flush mounted and minimally intrusive level sensors.  The diaphragm level switch is ideally used when vessel size or internal clearance is limited, or where protrusion into a vessel is not acceptable.  
• Tilt Switch
  • TC-1 & TC-3 - These tilt switch models can be used as high level indicators to eliminate bin overflow or to control levels in open piles.

Monitor Technologies

• SiloPatrol® - The SiloPatrol® SE continuous level measurement and inventory monitoring system is a truly robust smart cable-based bin level sensor system.  It is a field proven approach to reliably monitoring the level of material in bins, silos, and tanks.
• RadarRight™ - The RadarRight™ is a non-contact continuous level measurement sensor which means there is nothing to "touch" your process.  It provides dependable, real-time level measurements at the "right" price for the storage of powders, bulk solids, and liquids.

Monitor Technologies

• SiloTrack™ Cloud - The SiloTrack™ Cloud Remote Inventory Management Software is a web-based application software that provides users with an unsurpassed, flexible graphical interface for our SiloPatrol® SE model SMU inventory monitoring sensors and our RadarRight™ non-contact radar continuous level measurement sensors.
• SiloTrack™ PC - The SiloTrack™ PC Inventory Management Software is a PC-based application software that provides users with an unsurpassed, flexible graphical interface for our SiloPatrol® SE model SMU inventory monitoring sensors and our RadarRight™ non-contact radar continuous level measurement sensors.
• HMI2 - The HMI2 Operator Interface Control Console is a local interface that is compatible with Monitor's continuous level sensors which provide a RS-485 output.  The HMI2 allows for monitoring up to 32 sensors and displays measured or calculated data as well as the system's and sensor's diagnostic messages. The display can be easily switched to view calculated level, volume, weight or percent in addition to the basic distance measurement.  

Monitor Technologies

• HumiCore™ - The HumiCore™ moisture measurement system is an in-line system for monitoring and guarantees trouble-free measurement of the internal product moisture of solids and emulsions.  The sensor circuitry principle is centered around an electrical high frequency field.  it is suitable for many products including, but not limited to, grain, feed, seed, cereal, flour, sugar, coal, sand, wood shavings, dried food, fertilizer, tobacco, powder, pigments, plastic granules, and cement.

Monitor Technologies

• QuantiMass™ - The QuantiMass™ is a mass flow measurement sensor that is designed with the latest microwave technology and is used to quantify the flow of powders and solids being conveyed in metallic pipes.  This unit is installed in-line without the use of weight scales.  While it is compact in size it is also durable and non-intrusive.  The QuantiMass™ is suitable for powders, dust, pellets, and granular up to 0.75 inch.
• SFD-2 & SFI - The SFD-2 and SFI is Monitor's line of microwave solids flow monitors.  They are high quality, industrial grade instruments capable of providing a signal indicating the flow/no-flow condition of solids and powders in gravity chutes, feeders and pneumatic pipelines.  The SFD-2 provides relay outputs that can be setup to indicate changes in the target flow stream.  The SFI provides an analog output which varies with changing conditions of the material flow stream.

Monitor Technologies

• DustAlarm® - The DustAlarm® is ideal to use as a broken bag dust monitor and filter leak detector.  It utilizes Triboelectric technology with algorithms which is a proven technology that is accepted by the US EPA for dust partical emission detection.  It is able to provide reliable and economical detection of leaks and filter failures in the exhaust ducts of baghouses of various sizes, cartridge collectors, cyclones, and any other dust collector for most powder and bulk solids industries.
• DustTrend™ - The DustTrend™ provides continuous trend measurements that allow plant operators to identify changes in dust emission levels and optimize the facility's filtration systems.  This utilizes the same Triboelectric technology as the DustAlarm®.  The standard output can either be a 4-20 mA output and/or enhanced Modbus communication.  

Quadro

• Comil® - The Quadro® Comil® is the world's leading technology for achieving uniform size reduction, sieving, deagglomeration dispersion and mixing.  The Comil® is suitable in applications throughout the Pharmaceutical, food, fine chemical, personal care, and cosmetics industries, wherever process managers seek optimum process efficiency and product consistency.  
  • Overdriven - The Comil® Overdriven is available in five models, offering capacities up to 120,000 lbs/hr.  Manufactured in stainless steel for sanitary operation and easy cleanability.  The milling action can be fine tuned using a comprehensive selection of interchangeable tooling, as well as speed variation.  
  • Underdriven - The Comil® Underdriven provides all the features and options of the original Comil®, but with the additional advantages, including easier inline integration.  The mill advanced, compact design and extremely short head height provide for easy integration into processing environments where head room is limited.

Quadro

• FlexSift - The FlexSift is the cutting edge in high-capacity security screening and de-agglomeration technology. The unit effectively captures and retains impurities and other foreign materials easily and efficiently in a simple in-line configuration. It reduces the risk of contamination of final processed product, prevents damage to equipment and injury to personnel. Because of the compact size and low profile design, the unit fits below most bulk bag unloader and mixer discharges and easily integrates into most systems.

Quadro

• Scalable Lab System (SLS) - The Quadro® Scalable Lab System (SLS) is a units which allows for lab scale milling and processing with the ability to change between four milling heads in seconds.  It is suitable for dry milling and/or wet material conditioning.   The SLS gives the reassurance that particle sizes and distributions achieved in the lab can be directly transferred to the production scale equipment.  The operating parameters are simply transposed from small scale to full scale production. 
  • Head Options For SLS
    • Quadro® Comil® U5 and U5 High-Efficiency
    • Fitzmill L1A
    • Quadro® Flexsift S5
    • Quadro® H5 High Energy Comil®

Vincent Corporation

• VP/CP Series - The VP/CP series screw presses are high torque machines with relatively long screens.  The units are continuous dewatering presses with custom engineering for your application.  They are commonly used in pulp & paper, corn wet milling, and spent coffee applications, where the press cake requires maximum dewatering.  The presses also handle materials that are often considered unpressable.  
• KP Series - The KP series screw press is the most popular series.  This series is best suited for applications like produce waste, which requires less torque than offered by the other presses.  These presses feature the tapered shaft design, longer screens, and additional compression stages of the VP series combined with the lower horsepower requirement and price point of the standard KP series.
• TSP Series - The TSP series screw presses differ from the others because they have two overlapping screws.  They are best suited for applications involving very slippery material, those materials which require internal shredding, or installations requiring extraordinarily high throughput capacity. 

Vincent Corporation

• Fiber Filter - The Vincent Fiber Filter is a small footprint machine with strong non-blinding characteristics.  It achieves fine filtration by using filter sleeves made of woven fabric.  In recent years, its chief application has become filtration of wastewater.  Some other common applications for the Fiber Filter includes: cannery wastewater, canola and soybean protein concentrate, juice finishing, nutraceuticals, pumpkin, and starchy vegetable wastewater.  

AFL Industries

• Oil Stop Valve (OSV) - The OSV is an economical option used to confine hydrocarbon spills to the premises for safe disposal.  AFL's OSV is fabricated from either non-corrosive stainless steel or PVC and has only one moving part, the ballasted float.  

AFL Industries

• CVF Series - The CVF removes free hydrocarbons and settleable solids from industrial waste water and coolant.  in operation, the CVF accepts industrial liquid waste in the inlet chamber where settleable solids fall to the bottom as sludge for periodic removal. The waste stream then enters the coalescing separation chamber where AFL's Delta-Tubes inspire laminar flow characteristics to the liquid as it passes through the separator.  The result is a liquid more responsive to gravity separation.  Floating oil is collected by a Rotary Pipe Skimmer for collections and disposal in accordance with local regulations. 
• EGS Series - The EGS separates heavy solids and oil from industrial wastewater and storm water using gravity separation.  Heavy settleable solids drop out of oily wastewater in the inlet chamber.  In the separating chamber is collected by a rotary pipe skimmer for collection and disposal.  A sheen baffle retains residual floating oil as the treated effluent discharges through the outlet.  
• VTC Series - The CVF removes free hydrocarbons and settleable solids from industrial waste water and coolant.  in operation, the CVF accepts industrial liquid waste in the inlet chamber where settleable solids fall to the bottom as sludge for periodic removal. The waste stream then enters the coalescing separation chamber where AFL's Delta-Tubes inspire laminar flow characteristics to the liquid as it passes through the separator.  The result is a liquid more responsive to gravity separation.  Floating oil is collected by a Rotary Pipe Skimmer for collections and disposal in accordance with local regulations.

Solutions

• SC-2.4A - The SC2.4A Sample Cooler is the best available technology to efficiently cool steam and water samples.  The double hlical coil provides more transfer surface area in a smaller package.  The cooling flow is double-baffled to achieve better cooling efficiency.  Both shell and bolts are constructed out of 304 stainless steel and the tube is 316 stainless steel.

Solutions 

• MT-10-A - Solutions' Magnetic Trap model MT-10-A is effective in removing magnetite and other iron particles from samples.  It is easy and intuitive to clean and service.  The Magnet in the MT-10-A inserts into the "dry well" and does not contact the sample fluid.  Magnetite sticks on the wetted side off the drywell.  To clean the MT-10-A simply divert the sample outlet to drain and remove the Magcore from the drywell to flush the magnetite and debris from the trap.

Martek Instruments, Inc

• Mark 25 Analyzer - The Mark 25 Ultrapure Water Dissolved Oxygen Analyzer is a highly accurate, simple-to-use monitoring system that provides continuous monitoring of up to four ultrapure water sample points to the low parts/billion (ppb) level.  Installation, calibration, and sensor maintenance are easy and require a minimum of experience.
• Mark 24 Analyzer - The Mark 24 Ultrapure Water Quality Analyzer provides laboratory accuracy in a multi-channel, multiparameter on-lline instrument for continuous monitoring of high purity water quality.  Installation and calibration are easy and require a minimum of experience.  
• Dissolved Carbon Dioxide Analyzer - The Dissolved Carbon Dioxide Analyzer provides accurate, on-line determination of dissolved carbon dioxide as well as specific, cation, and degassed conductivity measurements in ultrapure water processes.  The analyzer's ability to provide real-time data make it the ideal analytical tool for monitoring high purity processes in nuclear and high-performance fossil fuel power plants; condensate polishing systems and demineralizers; semicondustor and pharmaceutical manufacturing plants; and other industrial applications.

Martek Instruments, Inc

• Martek ICOD with Pressure Chamber - The Ion Chromatograph Oxidation Device (ICOD) is an ancillary tool designed to provide a reliable and accurate method of detecting low levels (ppb) of organic contaminants.  The ICOD's ability to provide low-level detection of organic contaminants make it an important accessory for existing IC analysis when monitoring high purity make-up processes in nuclear and high-performance fossil fuel power plants.  

Martek Instruments, Inc

• Mark 20 Monitor - The Mark 20 Ultrapure Water Monitor provides laboratory accuracy in a multi-channel, multi-parameter on-line instrument for continuous monitoring of high purity water quality.  Designed for maximum flexibility and ease-of-use, the unit provides real-time measurement of up to eight separate parameter inputs to permit custom configurations for a variety of process applications. 

Martek Instruments, Inc

• Mark 24 Degas System - The Mark 24 Degas Cation Conductivity System provides accurate, on-line determination of specific cation, and degassed conductivity as well as calculated pH measurements in ultrapure water processes.  The system's ability to provide real-time data make it the ideal analytical tool for monitoring high purity processes in nuclear and high-performance fossil fuel power plants; condensate polishing systems and demineralizers; semiconductor and pharmaceutical manufacturing plants; and other industrial applications.